Zhuhai Pantum Electronics Co.,Ltd. Version: V1.0 Disclaimer For a better user experience, Zhuhai Pantum Electronics Co.,Ltd. reserves the right to make changes to the User Guide. The information contained herein is subject to change without notice.
The following label is attached to the laser components inside the printer: Reclamation and recycling To protect the environment, our corporation has already established the system of reclamation recovery at www.pantum.com. Safety Warning Please note the following safety warnings before using the printer: Warning There is high-voltage electrode inside the printer.
Page 4
23. This product is sold as a complete machine. The consumers can go to Pantum Aftersales Service Centre to purchase parts they need. If the product sold is inconsistent with the package list, please 24.
Member States relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits. The manufacturer of this product is: Zhuhai Pantum Electronics Co.,Ltd., Area A,3rd A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.
1. Before Using the Printer 1.1. Introduction of Models Series Name M6600 Series Picture Basic Function Print, Copy, Scan Basic Models USB Model, NET Model, Wi-Fi Model...
Page 10
1.2. Supplied Accessories Name USB Interface Cable Power Cord CD-ROM uick Setup Guide...
Page 11
1.3. Product View Side view (1) Cover Output Bin Control Panel Side view (2) Glass Platen Output Tray Paper Stop Feeder Tray...
Page 12
Rear View USB Interface Network Interface Power Interface Rear Cover 1.4. Laser Toner Cartridge Service Life of the Laser Toner Cartridge Type Laser Toner Cartridge with Standard Capacity...
1.5. Control Panel This button indicates the Wi-Fi connection status (only Wi-Fi button Power Saving/ Press this button to switch to power saving status or wake the Wake-up Button Status Light Scan Button Copy Button ID Card Copy Button Bill Copy Button Menu Button settings Back Button...
2. Paper and Print Media 3DSHU 6SHFL¿FDWLRQ Media Type A4, A5, A6, IS B5, ISO B5, B6, Letter, Legal, Executive, Media size M6600 Series Media weight Output tray...
Page 21
,QVWDOODWLRQ DQG 8QLQVWDOODWLRQ RI WKH 'ULYHU 6RIWZDUH &KDSWHU...
Page 22
3. Installation and Uninstallation of the ri er Software 3.1. indows ased ri er 3.1.1. Introduction Driver software helps users to run the installer and uninstaller through the installation and uninstallation wizards, which provides the following modules and main functions: Note: 3.1.2.
Page 41
:L)L +RWVSRW &RQ¿JXUDWLRQ When the wireless hotspot of printer is active, the user can connect to it directly by searching. The wireless hotspot is enabled by default, and the default password is 12345678 . The 7XUQ RII :LUHOHVV 'HYLFH device in the printer.
Page 43
PDF, Word, Excel, PPT, etc. 1. Turn on the printer. 2. Launch the Wi-Fi in the mobile device, connect it with the Wi-Fi hotspot of Pantum printer (For example, the Wi-Fi hotspot may display as Pantum-AP-XXXXXX). If there are several Pantum WiFi printers, when you select the printer hotspot, please tap Menu Button on the printer to be used, select Information Report and select Print WiFi hotspot with your mobile phone.
Page 44
5. Select printer, number of copies and paper size, click on “Print” on the top right corner to start printing. Note: Install “Mobile Print” App (Select from QR Code, Google Play Store, Pantum our “Mobile Print” App from Google Play Store and install the application in the mobile device.
Page 45
6.2.2. or Apple I S e ices iPad iPhone etc 1. Turn on the printer. 2. Launch the Wi-Fi in the mobile device, connect it with the Wi-Fi hotspot of Pantum printer (for example, the Wi-Fi hotspot displays Pantum-AP-XXXXXX). If there are several Pantum WiFi printers, when you select the printer hotspot, please tap Menu Button on the printer to be used, select Information Report and select Print WiFi hotspot with your mobile phone.
Page 46
7. Click on Print on the bottom left corner, the following interface pops up: 8. Click on Select Printer to select the corresponding printer. 9. Select the number of copies. 10. Click on Print to start printing.
Page 52
8. Click on Search , the page displays Searching scanner , the interface is as shown below and click on O after completing searching. 9. Click on Add IP Address in the middle of the navigation bar, the following interface pops 10.
Page 55
eneral Settings This chapter mainly introduces some general settings of the control panel s menu. .1. S stem Settings .1.1. Toner Sa e Setting Users can select Toner Save Setting to lower the cost of printing. When the Toner Save mode is On , the output color of the copy will be lighter.
Page 56
4) Press direction pad to select 1. Close and press O button. When symbol appears after 1. Close , it indicates that the toner save setting is off; or press direction to select 2. Open and press O button. When symbol appears after 2.
Page 57
.1.2. Language Setting Language Setting is used to select the language to be displayed on the control panel . The default language is Chinese. 1) Press Menu button to enter the menu interface. 2) Press direction pad to select 3. System Settings and press O button.
Page 58
.1.4. Sleep Time Setting Set the Sleep Time Mode to lower the power consumption. Sleep Time Setting allows users to select the idle time before the device enter into Sleep Mode. The default idle time is 1 minutes. 1) Press Menu button to enter the menu interface. 2) Press direction pad to select 3.
Page 59
4) Press direction pad direction pad to select 1. IPv4 or 2. IPv6 . 5) Press direction pad to select 2. Wireless Network Settings and press O button; Press direction pad to select 1. WPS PIN Mode . .1.6. Networ Information Users can check the network status through Network Information.
Page 60
4) Press direction pad to select 1. TCP/IP , 2. Wi-Fi Information . 5) Select 1. TCP/IP option and press O button, press direction pad to select 1. IP Address , 2. Subnet mask and 3. Gateway . 6) Select 2. Wi-Fi Information option and press O button, press direction pad select 1.
Page 73
. Cop .1. Plain Cop 1. Put the manuscript face down into the glass platen. Note: During copying, please do not open the cover to avoid any adverse impact on the image quality. For the information on Steps of Using Paper and Manuscript , please refer to Chapter 2.5.
Page 74
.2. Bill Cop Press this button to enter Bill Copy mode,which is used to output high-sharpness bill copy. Steps of Bill Cop 1. Press Bill Copy button to enter the Bill Copy mode, and then the area on the main LCD interface to display image quality will change to display Bill ;...
Page 75
Steps of I Card Cop 1. Press ID Card Copy button to enter the ID Card Copy mode. The printer of this model supports four types of ID Card copy, namely full page top to bottom, half page top to bottom, half page left to right, A5 long side, examples are as follows: 2.
Page 76
side of the ID Card is copied to one side of the paper. .4. Cancel Cop peration If you want to cancel the copy operation, please press Cancel button. The LCD Screen will prompt Canceling..
Page 78
10. Scan This printer provides two types of scan: Push Scan , which means scanning through the printer’s Control Panel operations; Pull Scan which means scanning through PC terminal scanning the application. 10.1. Push Scan This section introduces how to scan documents to the PC (only through USB cable 1) Put the document face down on the glass platen.
Page 79
10.1.2. Merge Scan When you want to merge multi-page scanned documents into one PDF, please use Merge Scan function. Note: The Merge Scan allow the document to be scanned into the PDF format by default. This printer can perform Merge Scan operation only on the control panel. 1.
Page 80
10.1.3. ther Scan unctions 1. Scan to E-mail Users can scan monochrome or color documents as attachments to E-mail application. Operation steps as follows: Type the IP address in the Web browser s address bar to access the embedded Web server of the printer.
Page 81
Click on New and the following window will pops up, edit the name of contacts ,input the E-mail address and then click on Submit . Put the document on the platen. Press Scan button on the control panel, and press to select 1.
Page 82
1) Operation Steps: Type the IP address in the Web browser s address bar to access the embedded Web server of the printer. Click on Setting FTP to enter into FTP Setting interface. Click New , the following window will pop up. Set the relative parameters of the FTP Protocol.
Page 83
FTP Server: IP Address of the server (such as 10.10.145.100 ) Port Number: Default port number is 21 Login Name: For example, anonymous Password: such as (anonymous login needs no password) Confirm Password: For example (anonymous login needs no password) Server Name: For example, PANTUM 10-7...
Page 84
10.2.1. Pantum Scan Application Operation Steps: 1) Double click on Pantum Scan Application on the computer, the icon is shown as below: 2) The prompt window is shown as below: 3) Set Scan in the right list. Click Scan on the bottom right corner and start scan.
Page 85
10.2.2. T AIN Scan ri er 2I¿FH 6RIWZDUH :RUG DQG ([FHO Operation Steps: 1) eyboard shortcuts: Alt I P S to open the application’s window. 2) Click on Device option and select TWAIN Scan, click the Custom Insert button below. 3) After the window pops up, set the scan information in the right list of Basic Setting and Advanced Setting .
Page 86
Note: Click on the Port below to select the scan port, which is shown as below: 10.2.2.2. Photoshop Operation Steps: 1) Launch Photoshop, click on File Import on the top left corner, select TWAIN Scan, as is shown below: steps. 10-10...
Page 87
10.2.3. IA Scan ri er :,$ 6FDQ :LQGRZV ;3 :LQGRZV 6HUYHU Operation Steps: 1) eyboard shortcuts: Alt I P S to open the application’s window. 2) Click on Device and select WIA Scan,click the Custom Insert below. 3) The prompt window as is shown below, set the scan information.
Page 88
4) Click on Adjust the Scanned Image uality on the bottom left corner of the above picture, settings, click on the O button, then Scan button to start scan. 2.Photoshop Operation Steps: 1) Launch Photoshop, click File - Import on the top left conrner and select WIA Scan, as is shown below: operation steps.
Page 89
:,$ 6FDQ :LQGRZV 9LVWD :LQGRZV 6HUYHU DQG ODWHU YHUVLRQV Operation Steps: 1) Click on Start - All Programs - Device and Printer on the left bottom of the desktop. 2) After the window pops up, select the needed printer, and right-click to select Set as default printer .
Page 90
3) Click on Start Scan in the above option bar. 4) After the window pops up, set the scan and click Scan on the bottom right corner and start scan. 10.2.4. Cancel Scan o During the scanning, two ways are available to cancel the job: 1) Press Cancel button on the control panel to cancel the job.
Page 91
10.3. Mac S stem Scan 10.3.1. ICA Scan 2SHQ ,&$ YLD 3ULQW DQG 6FDQ Operation Steps: 1. After installing the printer driver, click System Preferences icon on the bottom left corner of the computer desktop. 2. After the window pops up, click on Print and Scan . 3.
Page 92
4. Click on Open Scanner and the scan window will pop up. 5. Click on Show Details on the bottom right corner to set the scan parameters. 6. Click on Scan on the bottom right corner and start scan. 10-16...
Page 93
10.3.1.2. Call CIA through applications Operation Steps: 1) Click on Finder icon on the bottom left corner of the computer desktop, or use keyboard shortcuts command shift C to open the window. Find Image Capture in Applications (or conduct keyboard shortcuts command shift A to directly switch to Applications ) and click to launch the application.
Page 94
10.3.2. T AIN Scan Take Photoshop as an example. Operation Steps: 1) Launch Photoshop, click on File Import on the top left corner and select TWAIN Scan, as is shown below: steps. 10-18...
Page 96
Please clean the printer in accordance with the following steps: 1. Turn off the main power switch and unplug the power cord and USB cable. M6600 Series 2. Use a soft cloth to wipe the outside of the printer and remove the dust .
Page 97
4. Raise the scanning platform until it is locked. M6600 Series 5. Open the output bin by the upper right ridge of the concave section. M6600 Series 6. Remove the laser toner cartridge along the guides. M6600 Series 11-3...
Page 98
7. Gently wipe the dustproof mirror of laser scanning surface with a cotton swab or a dry and lint-free soft cloth with a little alcohol. M6600 Series 8. Clean the inside of the printer by using a dry and lint-free cloth to gently wipe the shaded area as shown in the picture below.
Page 99
11.2. Maintenance of Laser Toner Cartridge 11.2.1. Use and Maintenance of Laser Toner Cartridge For better print quality, please use the original Pantum laser toner cartridge. Note: when using the laser toner cartridge, please pay attention to the following: the package.
Page 100
Replacement steps are as follows: 1. Turn off the printer and raise the scanning platform until it is locked. M6600 Series 2. Open the output bin by the upper right ridge of the concave section. M6600 Series M6600 Series 11-6...
Page 101
6. Cover the output bin and close the scanning platform. M6600 Series 7. Restart the printer, and use the product control panel to print a test page.
Page 103
12. Trou leshooting Please read this section carefully. It can help you solve common malfunctions in the printing process. If the problems appeared cannot be solved, please timely contact Pantum Aftersales Service Center. port. 12.1. Clearing ammed Paper printing. If the printer cannot automatically start printing, please press the button on the control panel.
Page 104
M6600 Series 2) Open the output bin by the upper right ridge of the concave section. M6600 Series 12-3...
Page 105
M6600 Series M6600 Series M6600 Series 12-4...
Page 106
The print paper is loaded Please correctly load the print incorrectly. paper. Please cancel the current scan Scanner is Busy Please contact Pantum Scan failed Scanner internal failure. Customer Service. If the problem remains, please contact Pantum Customer Service. 12-5...