Pantum M6700 Series User Manual page 32

3) Align the manuscript to match the appropriate paper size.
If the manuscript does not match with any size marker, please align
Note: •
the upper-left corner of the manuscript with the arrow.
• Make sure there is no document in the ADF. If a document is detected in
the ADF, it will be more preferential than that on glass platen.
4) Close the scanner cover gently.
Note:
•
Please put the paper or document on the scanner glass after the glue, ink or
correction fluid are completely dried.
• Rough textured, uneven, oil stained and extremely smooth paper will make
printing effect poor.
• Please make sure that there is no dust, fluff, etc. on the paper.
• Paper shall be put on a flat surface and stored under a cool and dry environment.
• To avoid influencing the definition, please don't open the scanner cover during
scanning with the platen.
19