Wireless Network Setup (Applicable To Wi-Fi Models); Basic Structure Mode; Wireless Network Setup Tools - Pantum M6700 Series User Manual

5. Wireless network setup (applicable to Wi-Fi models)

Wireless network connection type is divided into basic structure mode and Wi-Fi Direct mode.
If you have problems with wireless network setup, please refer to
Network Setup FAQs.

5.1.Basic structure mode

You can connect a computer to your printer via access point (wireless router) as the medium.
Access point (wireless router) connection is divided into wireless network setup and Wi-Fi
Protected Setup (WPS).
Note: · The machine with the fax feature supports automatic search of wireless network
through the printer's control panel to select the wireless network you desire and
then input its password for connection.
Important: Before wireless network installation, you must learn about the service set
identifier (SSID) and password of your access point in order to use them during wireless
network setup. If they cannot be determined, please consult your network administrator or
access point (wireless router) manufacturer.

5.1.1.Wireless network setup tools

If your computer has been installed with a driver and had been connected to wireless network,
but the wireless network was changed, you can set it again with wireless network setup tools.
Basic structure mode: connecting to a wireless
device via router
1. Access point (wireless router)
2. Wireless network printer
3. Computer connecting to access point via
wireless network
4. Computer connecting to access point via
network cable
Wi-Fi Direct mode: wireless client is connecting to
a printer with Wi-Fi function
1. Wireless network printer
2. Wireless client is directly connecting to a
wireless network printer
Chapter 5.3 Wireless
33