8
Redial/Pause
Bill Copy Button
9
10
Wi-Fi button
11
Contacts
12
Cancel
13
Start Button
14
Menu
15
Back
16
OK
17
UP
18
Down
19
Status Light
This is used to redial the last number dialed before under
Standby mode or to insert a pause symbol in the fax number
under Edit mode.
Press this button to enter into Bill Copy mode.
Start Wi-Fi function (applicable to Wi-Fi model only).
Press this button for more than 2s during Wi-Fi connection to
cancel connection;
press this button for more than 2s after Wi-Fi is connected to
disconnect Wi-Fi (applicable to Wi-Fi model only).
Open save toner function(applicable to non-Wi-Fi model only).
This is used to enter quickly the Phone Book option under Fax
mode.
Execute cancel operation
Idle state interface under copy mode, to reset the "Number of
Copies" to 01.
This is used to start relevant operations after finishing operation
settings.
In case of a feed failure, please press this key for pick-up and
printing again.
Open the main menu of control panel
Return to the previous menu.
Confirm the selection on screen.
Scroll through the menus and options .
Increase 1 copy on the ready interface of Copy mode.
Scroll through the menus and options .
Decrease 1 copy on the ready interface of Copy mode.
Indicate the status of printer. (Please see
Chapter
1.6).
8