Control Panel; Overview Of Control Panel - Pantum M6700 Series User Manual

1.5.Control Panel

1.5.1.Overview of control panel

The layout of the printer control panel is shown below:
Control panel without the fax feature
No.
Name
LCD Display
1
2 Copy Button
Scan Button
3
ID Card Copy Button
4
5
Wi-Fi button
6
Bill Copy Button
7
Cancel
8
Start Button
Functions
Display operation interface and product information.
Press this button to enter into copy mode.
Press this button to enter into scan mode.
Press this button to enter into ID Card Copy mode.
Start Wi-Fi function (applicable to Wi-Fi model only).
Press this button for more than 2s during Wi-Fi connection to
cancel connection;
press this button for more than 2s after Wi-Fi is connected to
disconnect Wi-Fi (applicable to Wi-Fi model only).
Open save toner function(applicable to non-Wi-Fi model only).
Press this button to enter into Bill Copy mode.
Execute cancel operation
Idle state interface under copy mode, to reset the "Number of
Copies" to 01.
This is used to start relevant operations after finishing operation
settings.
In case of a feed failure, please press this key for pick-up and
printing again.
6