Measurement Tables - GE MiCOM P747 Agile Technical Manual

Chapter 6 - Monitoring and Control
Courier Text Col
MEASURE'T
0D
SETUP
This column contains settings for the measurement setup
Default Display 0D
This setting is used to select the default display from a range of options.
Local Values 0D
This setting controls whether local measured values (via HMI or front port) are displayed as primary or secondary
quantities.
Remote Values 0D
This setting controls whether remote measured values (via rear comms ports) are displayed as primary or secondary
quantities.
Measurement Ref 0D
This sets the phase reference for all angular measurements (for Measurements 1 only).
4.3

MEASUREMENT TABLES

Courier Text Col
MEASUREMENTS
02
1
This column contains measurement parameters
IX-1 Magnitude 02
IX-1 Magnitude
IX-1 Phase Angle 02
IX-1 Phase Angle
164
Row Default Setting
Description
00
01 User Banner
02 Primary
03 Primary
04 VXN Z1
Row Default Setting
Description
00
25
26
MiCOM P747
Available Options
0 Banner
1 Date and Time
2 Description
3 Plant Reference
4 Frequency
5 Access Level
0 = Primary or 1 = Secondary
0 = Primary or 1 = Secondary
0 VxN Z1
1 VxN Z2
2 VxN Z3
3 VxN Z4
4 IX-T1
5 IX-T2
6 IX-T3
7 IX-T4
8 IX-T5
9 IX-T6
10 IX-T7
11 IX-T8
12 IX-T9
13 IX-T10
14 IX-T11
15 IX-T12
16 IX-T13
17 IX-T14
18 IX-T15
19 IX-T16
20 IX-T17
21 IX-T18
Available Options
Not Settable
Not Settable
P747-TM-EN-1
P747-TM-EN-1.1