Table of Contents
Advertisement
MiCOM P747
1.1.2
DOWNLOAD DATA MODELS
1.
Close S1 Agile and run the Data Model Manager.
2.
Follow the on-screen instructions.
1.1.3
SET UP A SYSTEM
1.
Click the System Explorer tile then the New System tile or Open System tile.
2.
From the menu bar select View then System Explorer.
3.
In the System Explorer pane, right click System and select New Substation, New Voltage Level,
New Bay, and New Device.
4.
Right-click the Device subfolders to view properties and add or extract files.
1.1.4
CONNECT TO AN IED FRONT PORT
1.
Connect the cable between the PC and IED.
2.
From the main screen, click Quick Connect.
3.
Select the product range.
4.
Select connection to the Front Port.
5.
Set the connection parameters and click Finish.
1.1.5
CONNECT TO AN IED IN A SYSTEM
1.
Make sure that the correct serial rear port or Ethernet cables are in place.
2.
From the main screen, click Quick Connect.
3.
Select the product range.
4.
Select connection to the Rear Port or Ethernet Port.
5.
Set the connection parameters and click Finish.
1.1.6
SEND SETTINGS TO A DEVICE
To send settings to a device there must be at least one setting file in a settings folder for a device.
1.
Right-click the device name in System Explorer and select Send.
2.
In the Send To dialog select the setting files and click Send.
3.
Click Close to close the Send To dialog.
1.1.7
EXTRACT SETTINGS FROM A DEVICE
1.
Using System Explorer, find the device.
2.
Right-click the device's Settings folder and select Extract Settings or Extract Full Settings.
3.
Once the settings file is retrieved, click Close.
1.1.8
EXTRACT A PSL FILE FROM A DEVICE
1.
Using System Explorer, find the Px4x device.
2.
Right-click the device's PSL folder and select Extract.
3.
Once the file is retrieved, click Close.
P747-TM-EN-1
P747-TM-EN-1.1
Chapter 10 - Settings Application Software
297
- Quick Links:
- Protection Functions
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
