GE MiCOM P747 Agile Technical Manual page 99

MiCOM P747
Courier Text Col
Active Group 00
This cell displays the active settings group
Software Ref. 1 00
This cell displays the IED software version including the protocol and IED model.
Software Ref 2 00
This cell displays the software version of the Ethernet card for models equipped with IEC 61850.
Plant Status2 00
This cell displays the circuit breaker plant status. The first two bits are used. One to indicate the 52A state and one to
indicate the 52B state.
Opto I/P Status 00
This cell displays the status of the first set of available opto-inputs. This information is also available in the
COMMISSIONING TESTS column
Opto I/P Status2 00
This cell displays the status of the second set of available opto-inputs. This information is also available in the
COMMISSIONING TESTS column
Relay O/P Status 00
This cell displays the status of the available output relays.
P747-TM-EN-1
P747-TM-EN-1.1
Row Default Setting
0E
11
12
25
30
31
40
Description
1, 2, 3, 4
<Software Ref. 1>
<Software Ref. 2>
32 bit binary flag (data type G8):
0 = energised
1 = de-energised
32 bit binary flag (data type G8):
0 = energised
1 = de-energised
32 bit binary flag (data type G9):
0 = operated state
1 = non-operated state
Chapter 4 - Configuration
Available Options
79