List Of Boards - GE MiCOM P747 Agile Technical Manual

Chapter 3 - Hardware Design
Case width (TE)
40TE
60TE
80TE
Note:
Due to the number of required input modules, the P747 only comes in an 80TE case
3.2

LIST OF BOARDS

The product's hardware consists of several modules drawn from a standard range. The exact specification
and number of hardware modules depends on the model number and variant. Depending on the exact
model, the product in question will use a selection of the following boards.
Board
Main Processor board
Power supply board 24/54V DC
Power supply board - 48/125V DC
Power supply board 110/250V DC
Transformer board
Input board
Input board with opto-inputs
IRIG-B board - modulated
IRIG-B - demodulated input
Fibre board
Fibre + IRIG-B
2nd rear communications board
2nd rear communications board with IRIG-B input
100MhZ Ethernet board
100MhZ Ethernet board with modulated IRIG-B
100MhZ Ethernet board with demodulated IRIG-B
Redundant Ethernet SHP+ modulated IRIG-B
Redundant Ethernet SHP + demodulated IRIG-B
Redundant Ethernet RSTP + modulated IRIG-B
Redundant Ethernet RSTP+ demodulated IRIG-B
Redundant Ethernet DHP+ modulated IRIG-B
Redundant Ethernet DHP+ demodulated IRIG-B
Redundant Ethernet PRP+ modulated IRIG-B
Redundant Ethernet PRP+ demodulated IRIG-B
Output relay output board (8 outputs)
Combined coprocessor/opto-input board
28
Case width (mm)
203.2
304.8
406.4
Main Processor board – with support for function keys
Power supply input. Accepts DC voltage between 24V and 54V
Power supply input. Accepts DC voltage between 48V and 125V
Power supply input. Accepts DC voltage between 110V and 125V
Contains the voltage and current transformers
Contains the A/D conversion circuitry
Contains the A/D conversion circuitry + 8 digital opto-inputs
Interface board for modulated IRIG-B timing signal
Interface board for demodulated IRIG-B timing signal
Interface board for fibre-based RS485 connection
Interface board for fibre-based RS485 connection + demodulated IRIG-B
Interface board for RS232 / RS485 connections
Interface board for RS232 / RS485 + IRIG-B connections
Standard 100MHz Ethernet board for LAN connection (fibre + copper)
Standard 100MHz Ethernet board (fibre / copper) + modulated IRIG-B
Standard 100MHz Ethernet board (fibre / copper)+ demodulated IRIG-B
Redundant SHP Ethernet board (2 fibre ports) + modulated IRIG-B input
Redundant SHP Ethernet board (2 fibre ports) + demodulated IRIG-B input
Redundant RSTP Ethernet board (2 fibre ports) + modulated IRIG-B input
Redundant RSTP Ethernet board (2 fibre ports) + demodulated IRIG-B input
Redundant DHP Ethernet board (2 fibre ports) + modulated IRIG-B input
Redundant DHP Ethernet board (2 fibre ports) + demodulated IRIG-B input
Redundant PRP Ethernet board (2 fibre ports) + modulated IRIG-B input
Redundant PRP Ethernet board (2 fibre ports) + demodulated IRIG-B input
Standard output relay board with 8 outputs
To provide extra processing power and extra opto-inputs
Case width (inches)
8
12
16
Use
MiCOM P747
P747-TM-EN-1
P747-TM-EN-1.1