Skip Blocks - Siemens SINUMERIK 840D sl Operating Manual

Machine the workpiece
4.8 Controlling the program run
Activating program control
You can control the program sequence however you wish by selecting and clearing the
relevant check boxes.
Display / response of active program controls:
If a program control is activated, the abbreviation of the corresponding function appears in
the status display as response.
Procedure
See also
Setting for automatic mode (Page 127)
4.8.2

Skip blocks

It is possible to skip program blocks, which are not to be executed every time the program
runs.
The skip blocks are identified by placing a "/" (forward slash) or "/x (x = number of skip level)
character in front of the block number. Several consecutive blocks can also be skipped.
The statements in the skipped blocks are not executed, i.e. the program continues with the
next block, which is not skipped.
The number of skip levels that can be used depends on a machine datum.
108
1. Select the "Machine" operating area.
2. Press the <AUTO> or <MDA> key.
3. Press the "Prog. ctrl." softkey.
The "Program control" window appears.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Operating Manual, 02/2011, 6FC5398-6AP40-0BA0
Universal