Siemens SINUMERIK 840D sl Operating Manual page 204

Tool management
9.6 Tool wear
Column heading
T C
Tool life
Workpiece count
Wear *
*Parameter depends on
selection in TC
Setpoint
Prewarning limit
G
Icons in the wear list
Icon/
Marking
Tool type
Red "X"
Yellow triangle pointing
downward
Yellow triangle pointing
upward
Green border
Magazine/location number
Green double arrow
Gray double arrow
(configurable)
Red "X"
204
Meaning
Selection of tool monitoring
- by tool life (T)
- by count (C)
- by wear (W)
The wear monitoring is configured via a machine data item.
Please refer to the machine manufacturer's instructions.
Tool life
Number of workpieces
Tool wear
Setpoint for tool life, workpiece count, or wear
Specification of the tool life, workpiece count or wear at which a warning
is displayed.
The tool is disabled when the checkbox is selected.
Meaning
The tool is disabled.
The prewarning limit has been reached.
The tool is in a special state.
Place the cursor on the marked tool. A tooltip provides a
short description.
The tool is preselected.
The magazine location is positioned at the change position.
The magazine location is positioned at the loading position.
The magazine location is disabled.
Operating Manual, 02/2011, 6FC5398-6AP40-0BA0
Universal