Siemens SINUMERIK 840D sl Operating Manual page 242

Program management
10.11 Changing file and directory properties
Procedure
...
242
1. Select the Program manager.
2. Choose the desired storage location and position the cursor on the file
or directory whose properties you want to display or change.
3. Press the ">>" and "Properties" softkeys.
The "Properties from ..." window appears.
4. Enter any necessary changes.
Note: You can save changes via the user interface in the NC memory.
5. Press the "OK" softkey to save the changes.
Operating Manual, 02/2011, 6FC5398-6AP40-0BA0
Universal