Siemens SINUMERIK 840D sl Operating Manual page 239

Note
Copying files in the same directory
You cannot copy files to the same directory. You must copy the file under a new name.
Universal
Operating Manual, 02/2011, 6FC5398-6AP40-0BA0
4. Select the directory in which you want to paste your copied
directory/program.
5. Press the "Paste" softkey.
If a directory/program of the same name already exists in this directory,
you are are informed. You are requested to assign a new name,
otherwise the directory/program is assigned a name by the system.
If the name contains illegal characters or is too long, a prompt will
appear for you to enter a permissible name.
6. Press the "OK" or "Overwrite all" softkey if you want to overwrite
existing directories/programs.
- OR -
Press the "No overwriting" softkey if you do not want to overwrite
already existing directories/programs.
- OR -
Press the "Skip" softkey if the copy operation is to be continued with the
next file.
- OR -
Enter another name if you want to paste the directory/program under
another name and press the "OK" softkey.
10.9 Copying and pasting a directory/program
Program management
239