Nc Memory; Local Drive - Siemens SINUMERIK 840D sl Operating Manual

Program management
10.1 Overview
10.1.1

NC memory

The complete NC working memory is displayed along with all tools and the main programs
and subroutines.
You can create further subdirectories here.
Proceed as follows
10.1.2

Local drive

Workpieces, main and subprograms that are saved in the user memory of the CF-Card or on
the local hard disk are displayed.
For archiving, you have the option of mapping the structure of the NC memory system or to
create your own archiving system.
You can create any number of subdirectories here, in which to store any files (e.g. text files
with notes).
Procedure
On the local drive, you have the option of mapping the directory structure of the NC memory.
This also simplifies the search sequence.
222
1. Select the "Program manager" operating area.
2. Press the "NC" softkey.
Software options
To display the "Local drive" softkey, you require the option "Additional 256 MB
HMI user memory on CF Card of the NCU" (not for SINUMERIK Operate on
PCU50 or PC/PG).
1. Select the "Program manager" operating area.
2. Press the "Local drive" software key.
Operating Manual, 02/2011, 6FC5398-6AP40-0BA0
Universal