5.8.2
Panning a graphical representation
Precondition
The simulation or the simultaneous recording is started.
Procedure
5.8.3
Rotating the graphical representation
In the 3D view you can rotate the position of the workpiece to view it from all sides.
Precondition
Simulation has been started and the 3D view is selected.
Procedure
Universal
Operating Manual, 02/2011, 6FC5398-6AP40-0BA0
1.
Press a cursor key if you wish to move the graphic up, down, left, or
right.
1.
Press the "Details" softkey.
2.
Press the "Rotate view" softkey.
5.8 Modifying and adapting the simulation graphics
Simulating machining
151