Modifying The Viewport - Siemens SINUMERIK 840D sl Operating Manual

Machine the workpiece
4.15 Moldmaking view
Note
Selected section
The selected sections and size changes are kept as long as the program is selected.
4.15.5.2

Modifying the viewport

Use the magnifying glass if you would like to move, increase or reduce the size of the
section of the mold making view, e.g. to view details or display the complete workpiece.
Using the magnifying glass, you can define your own segment and then increase or
decrease its size.
Precondition
● The mold making view has been started.
● The "Graphic" softkey is active.
Procedure
134
1. Press the "Details" softkey.
2. Press the "Zoom" softkey.
A magnifying glass in the shape of a rectangular frame appears.
3. Press the "Magnify +" or <+> softkey to enlarge the frame.
- OR -
Press the "Magnify -" or <-> softkey to reduce the frame.
- OR -
Press one of the cursor keys to move the frame up, down, left or right.
4. Press the "Accept" softkey to accept the section.
Operating Manual, 02/2011, 6FC5398-6AP40-0BA0
Universal