Siemens SINUMERIK 840D sl Operating Manual page 23

Key
Universal
Operating Manual, 02/2011, 6FC5398-6AP40-0BA0
Function
<Equals>
Opens the calculator in the entry fields.
<Asterisk>
Opens a directory with all of the subdirectories.
<Tilde>
Changes the sign of a number between plus and minus.
<INSERT>
 Opens an editing window in the insert mode. Press the key
 Opens a selection box and shows the selection possibilities.
 In the machining step program, enters an empty line for G
+ <INSERT> + <SHIFT>
For G code programming, for a cycle call activates or
deactivates the edit mode.
<INPUT>
 Completes input of a value in the entry field.
 Opens a directory or a program.
 Inserts an empty program block if the cursor is positioned at
 Inserts a character to select a new line and the program
 In the G code, inserts a new line after the program block.
 In the machining step program, inserts a new line for G code.
<ALARM> - only OP 010 and OP 010C
Select the "Diagnosis" operating area.
<PROGRAM> - only OP 010 and OP 010C
Calls the "Program Manager" operating area.
<OFFSET> - only OP 010 and OP 010C
Calls the "Parameter" operating area.
<PROGRAM MANAGER> - only OP 010 and OP 010C
Calls the "Program Manager" operating area.
again, exits the window and the entries are undone.
code.
the end of a program block.
block is split up into 2 parts.
Introduction
1.2 Operator panel fronts
23