8.7
Deleting a block
You have the option of deleting a program block entirely.
Requirement
"AUTO" mode: The program to be processed is selected.
Proceed as follows
Universal
Operating Manual, 02/2011, 6FC5398-6AP40-0BA0
1.
Select the "Machine" operating area.
2.
Press the <AUTO> or <MDA> key.
3.
Press the <TEACH IN> key.
4.
Press the "Teach prog." softkey.
5.
Click the program block to be deleted.
6.
Press the ">>" and "Delete block" softkeys.
The program block on which the cursor is positioned is deleted.
Teaching in a program
8.7 Deleting a block
181