Reading In An Archive In The Program Manager - Siemens SINUMERIK 840D sl Operating Manual

Program management
10.13 Backing up data
10.13.3

Reading in an archive in the Program Manager

In the "Program Manager" operating area, you have the option of reading in archives from
the archive folder of the system data as well as from configured USB and network drives.
Procedure
248
8. Press the "Archive" and "Generate archive" softkeys.
The "Generate Archive: Select storage location" window opens.
The "Archive" folder with the subfolders "User" and "Manufacturer" as
well as the storage media (e.g. USB) are displayed.
9. Select the required location for archiving and press the "New directory"
softkey to create a suitable subdirectory.
The "New Directory" window opens.
10. Enter the required name and press the "OK" softkey.
The directory is created subordinate to the selected folder.
11. Press the "OK" softkey.
The "Generate Archive: Name" window opens.
12. Select the format (e.g. archive ARC (binary format)), enter the desired
name and press the "OK" softkey to archive the file/files.
A message informs you if archiving was successful.
13. Press the "OK" softkey to confirm the message and end the archiving
operation.
An archive file in .arc format is created in the selected directory.
Software option
In order to read-in user archives in the "Program Manager" operating area,
you require the option "Additional HMI memory on CF Card of NCU" (not for
SINUMERIK Operate on PCU50 / PC).
1. Select the "Program Manager" operating area.
2. Press the "Archive" and "Read in archive" softkeys.
The "Read in archive: Select archive" window opens.
Operating Manual, 02/2011, 6FC5398-6AP40-0BA0
Universal