Manual Watering; Manually Water Selected Zones - Rain Bird ESP-SMT Installation & Operation Manual

Manual Watering

This section shows you how to manually water an individual zone, a
combination of individual zones, or all zones.
Rotate the dial to MANUAL WATERING position...
AUTO
OFF
MANUAL
WATERING
RESTORE
SETTINGS
SYSTEM
REVIEW
FINE-TUNE
WATERING
ESP-SMT Smart Modular Control System
49
A
SET DATE
& TIME
CONFIGURE

Manually Water Selected Zones

CONTROLLER
Water a single Zone or any combination
of Zones with a specific manual run time
INPUT ZONE
for each Zone.
INFORMATION
B
SPECIAL
FEATURES
The MANUAL WATERING screen
will appear and Water Selected
Zones will be blinking. If you want
to manually water a single zone or
a combination of zones, Press the
SELECT button.
The MANUAL WATERING MINUTES
PER ZONE will appear and the
value for Zone 1 will begin to blink.
If you want to apply water on zone 1
manually, press the - or + button(s)
to set the desired amount of manual
irrigation for zone 1; then press the
NEXT button.
MANUAL WATERING
Water Selected Zones
A
- OR -
Water All Zones
SELECT
MANUALLY WATER
MINUTES PER ZONE
1 6 0 10 n/a
12
B
2 0 7 0 11
3 0 8 n/a 12
4 0 9 n/a 13
5 0
BACK NEXT
n/a
n/a
n/a