Set Current Date & Time; Set Month; Set Day Of Month; Set Year - Rain Bird ESP-SMT Installation & Operation Manual

Set Current Date & Time
This section shows you how to set the current date & time on the ESP-SMT Controller.
Rotate the dial to the SET DATE & TIME position...
AUTO
OFF
MANUAL
WATERING
RESTORE
SETTINGS
SYSTEM
REVIEW
FINE-TUNE
WATERING
!
NOTE: Make sure the hour is set
correctly to either AM or PM.
ESP-SMT Smart Modular Control System
7
A
SET DATE

Set Month

& TIME
a. Press the - or + button(s) until the
CONFIGURE
CONTROLLER

Set Day of Month

INPUT ZONE
INFORMATION
b. The day of the month will begin to
SPECIAL
FEATURES

Set Year

c. The year will begin to blink. Press

Set Hour

d. The hour will begin to blink. Press
The SET CURRENT DATE & TIME
screen will appear and the three
letter month designation will be
blinking on the display.
current month is shown; then press
the NEXT button.
blink. Press the - or + button(s) until
the current day is shown; then press
the NEXT button.
the - or + button(s) until the current
year is displayed; then press the
NEXT button.
the - or + button(s) until the current
hour appears on the display; then
press the NEXT button.
SET CURRENT
DATE AND TIME
A
01 Jan 2007
a.
10:16 AM
BACK NEXT
SET CURRENT
DATE AND TIME
A 01 Mar 2007
b. 10:16 AM
BACK NEXT
SET CURRENT
DATE AND TIME
A 24 Mar
2007
c. 10:16 AM
BACK NEXT
A
d.