Review Zone Information - Rain Bird ESP-SMT Installation & Operation Manual

d. The value for the Minutes Per
Cycle will begin to blink. Press the
- or + button(s) to adjust to the
desired Minutes Per Cycle (this value
can be from 1 to 30 minutes per
cycle); then press the NEXT button
and the ZONE REVIEW screen will
appear.

Review Zone Information

The REVIEW screen
previously entered information for the
specific zone that you entered in the
previous steps following the Zone Input
Wizard
If you want to change any of the
31
information on the REVIEW screen,
press the CHANGE button and the
SOIL TYPE screen will appear. Go
to step 5 on page 20 to change the
information as required.
If you accept all of the information
32
in the REVIEW screen then press the
ACCEPT button.
The SELECT ZONE screen will
33
appear. Select the next zone and
repeat steps starting on page 19 for
all zones that will be enabled either
now or in the future.
As you enter information for each
active zone, it will be saved for recall
in the event of a power outage.
You have now completed all of the required
steps for the INPUT ZONE INFORMATION
dial position (see page 31 for Review
Checklist).
displays the
NEWLY PLANTED Zone 2
Water Every Calendar
30 Day For Next 14 Days
Cycles Per Day
d.
Minutes Per Cycle
09:00 AM to 04:00 PM
BACK
NEXT
REVIEW Zone 2
Rotor 0.4 in/hr
Sandy Loam
Slope 8° - up
31
Shrubs Average
Sparse 75% Shade
Plants Established
CHANGE ACCEPT
ESP-SMT Smart Modular Control System
REVIEW Zone 2
Rotor
Sandy Loam
Slope
32
Shrubs
6
Sparse
8
Plants Established
CHANGE
ON
SELECT ZONE
Zone
33
OFF
BACK
ON
0.4 in/hr
8° - up
Average
75% Shade
ACCEPT
3
NEXT
30