Rain Bird ESP-SMT Installation & Operation Manual page 28

If Inline Grid is selected:
N
a. The Flow Rate value will blink. Use
the - or + button(s) to change the
Flow Rate to the desired value. Press
the NEXT button.
b. The Emitter Spacing value will blink.
Use the - or + button(s) to change
the value as desired. Press the NEXT
button.
c. The Row Spacing value will blink.
Use the - or + button(s) to change
to the desired value. Press the NEXT
button.
d. The Estimated Application Rate
screen will appear with the Adjust
Factor blinking. Use the - or +
button(s) to change to the desired
Adjust Factor value. Press the NEXT
button.
e. The CYCLE/SOAK
appear.
ESP-SMT Smart Modular Control System
23
screen will
INLINE GRID Zone 11
Flow Rate 0.90
N Emitter Spacing 12
a.
Row Spacing 12
BACK NEXT
INLINE GRID Zone 11
Flow Rate 0.90
N Emitter Spacing 12
b.
Row Spacing 12
BACK NEXT
INLINE GRID Zone 11
Flow Rate 0.90
N Emitter Spacing 18
c.
Row Spacing 12
BACK NEXT
INLINE GRID
Est.Application
GPH
0.64 in/hr
N
Adjust Factor
in
Net Application Rate:
d.
0.64 in/hr
in
BACK
INLINE GRID
Est.Application
GPH
0.64 in/hr
N
Adjust Factor
in
Net Application Rate:
e.
0.61 in/hr
in
BACK
GPH
in
in
Zone 11
Rate:
100%
NEXT
Zone 11
Rate:
95%
NEXT