Save Settings To "Contractor Default" Program - Rain Bird ESP-SMT Installation & Operation Manual

Save Settings to "Contractor
Default" Program
J The SPECIAL FEATURES screen
will appear and Save Contractor
Deflts will be blinking. If you want
to save your current settings into
memory for retrieval at a later
date in case you or your customer
accidentally makes
setting adjustments, press the
SELECT button.
K The SAVE CURRENT SETTINGS TO:
Contractor Defaults screen will
appear. If you want to continue the
process of saving your settings to
Contractor Default, press the SAVE
button.
L A WARNING screen will appear.
If you want to continue to save
your current settings press the
CONTINUE button.
The CURRENT SETTINGS SAVED
M
screen will appear. Press the
CONTINUE button.
undesired
SPECIAL FEATURES
Event Days Off
Short Circuit Test
Adv. Controller Setup
J
Advanced Zone Setup
Save Contractor Dflts
Set Units
SELECT
SAVE CURRENT
SETTINGS TO:
K Contractor Defaults
QUIT SAVE
ESP-SMT Smart Modular Control System
WARNING
Saving Settings To
L
Contractor Defaults
Will Overwrite All
Previously Saved
Contractor Defaults
QUIT
SAVE
M
38