Manual Watering; Start Station - Rain Bird LXME2 Installation, Programming & Operation Manual

15.

MANUAL WATERING

The LXME2 controller allows you to manually start a station, a program, or to open a Normally Closed
Master Valve (NCMV) to provide water to a for manual watering.

15.1.1 Start Station

•
Manual Watering > Start Station will pause currently running programs.
•
Ensure device addresses are present and entered correctly prior to Manual Station or Manual Program
operations.
1 Turn the controller dial to Manual Watering
2 At the Manual Watering screen, with
3 At the Run Time - Station screen, press the and key to select the desired station
(from 1 to 240) to run manually.
4 Press the Arrow keys to set the station Run Time (from 0 hours, 1 minute to 96 hours).
Press the Run key to start irrigation for that station.
•
Press and HOLD keys to accelerate settings.
5 A confirmation screen shoes that irrigation has started.
Repeat this process to manually water other stations
•
Stations will run sequentially in the order in which they were selected.
6 To view the Station while running, turn the controller dial to the AUTO position. Press
the and keys to add or subtract minutes from the run time for the currently running
station. To advance to the
Navigation:
Manual Watering
Start Station
Start Program
MV Water Window
Test All Stations
"Start Station" selected, press
station in a program, press the Adv key.
Next
Run Time - station
HH:MM
Custom:
00:00
Program 1:
01:15
Program 2:
02:30
Next
Next .
Current Section: Manual Watering 77
001