Set Units - Rain Bird ESP-SMT Installation & Operation Manual

Set Units

Allows you to assign the Time Format
and the Unit Format displayed on the
ESP-SMT screen.
N If you would like to change the time
format or the unit format from that
currently shown on the display:
Press the UP and Down arrow
button(s) until Set Units is blinking
on the display; then press the
SELECT button.
The SET TIME FORMAT screen will
O
appear and the current time
format will blink. If you wish to
change the time format to an
alternate choice (For Example: from
AM/PM format to 24 Hour format):
Press the UP or DOWN button(s) to
the desired time format; then press
the SELECT button.
ESP-SMT Smart Modular Control System
39
The SET UNITS FORMAT screen
P
will appear and the current unit
format will blink. If you wish to
change the unit format to an
alternate choice (For Example:
English format to Metric format):
Press the UP or DOWN button(s) to
the desired time format; then press
the SELECT button.
!
NOTE: The factory
or Automatic
automatically set the time format
to "AM/PM" and the Unit format
to "English" when the ESP-SMT
controller is connected to a 60Hz
power source.
Event Days Off
Block One Day A Week
Wiring Test
N
Adv. Controller Setup
Advanced Zone Setup
Set Units
default
O
setting will
BACK
P
BACK
SPECIAL FEATURES
SELECT
SET TIME FORMAT
Automatic
AM/PM
24-Hour
SELECT
SET UNITS FORMAT
Automatic
English
Metric
SELECT