Select Sprinkler Type Method - Rain Bird ESP-SMT Installation & Operation Manual

Once you've identified the correct
H
soil type for the site; press the down
arrow button until the desired soil
type is blinking; press the SELECT
button.

Select Sprinkler Type Method

I The SPRINKLER TYPE screen will
appear;
Press the up or down arrow button(s)
to navigate to the dominant sprinkler
type for that zone; then press the
SELECT button.
!
NOTE: It is recommended that
the Default Net Application rate be
adjusted to match the actual zone
conditions. See pages 81-83 for
different methods to determine
the correct value.
Sprinkler Type - Default Net
Application Rates
Net Application
Sprinkler Type
Rate (in/hr)
Sprays 1.60
Rotors 0.45
Rotary Nozzle 0.50
Bubblers 2.50
Point Source Drip 0.80
ESP-SMT Smart Modular Control System
21
The screen will display the default
J
Net Application Rate for the
sprinkler type selected.
K If you need to change this value to
better match the actual application
rate, press the - or + button(s) until
the desired value is shown.
If choosing Drip as the sprinkler
L
type, you will be given two types of
drip to select from.
a. When Drip is blinking on the display,
press the SELECT button.
b. Select Point Source or Inline Grid.
SOIL TYPE
Sand
8 Sandy Loam
Clay Loam
Clay
BACK Help
SPRINKLER TYPE Zone 2
Sprays
Bubblers
Rotary Nozzle
9
Time-Based
BACK
J
K
Zone 2
Loamy Sand
Loam
L
Silty Clay
a.
SELECT
Rotors
L
Drip
- OR -
b.
SELECT
ROTOR Zone 2
Net Application Rate:
0.45 in/hr
BACK NEXT
ROTOR Zone 2
Net Application Rate:
0.25 in/hr
BACK NEXT
SPRINKLER TYPE Zone 2
Sprays Rotors
Bubblers
Rotary Nozzle
Drip
- OR -
Time-Based
BACK SELECT
DRIP Zone 2
Point Source
Inline Grid
BACK SELECT