Method 2: Enter Custom Data For Location - Rain Bird ESP-SMT Installation & Operation Manual

Configure Controller

Method 2: Enter Custom Data for Location

Rotate the dial to the CONFIGURE CONTROLLER position...
AUTO
OFF
MANUAL
WATERING
RESTORE
SETTINGS
SYSTEM
REVIEW
FINE-TUNE
WATERING
ESP-SMT Smart Modular Control System
11
A
SET DATE
& TIME
CONFIGURE
B
CONTROLLER
INPUT ZONE
INFORMATION
a. Press the - or + button(s) until the
SPECIAL
FEATURES
b. The value for Elevation will begin
The CONFIGURE CONTROLLER
screen will appear. Press the UP or
DOWN arrow button(s) until Enter
Custom Data for Location begins
to blink; then press the SELECT
button.
The LATITUDE & ELEVATION
screen will appear and the value
corresponding to Latitude will be
blinking.
correct value is entered; then press
the NEXT button.
to blink. Press the - or + button(s)
until the correct value (100 foot
increments) is entered; then press
the NEXT button.
CONFIGURE CONTROLLER
Enter Site Zip Code
A
- OR -
Enter Custom Data for
Location
SELECT
LATITUDE & ELEVATION
B
Latitude 35
Elevation 0 ft
a.
BACK NEXT
B
b.
°N