Vitek VT-TTAR810 User Manual page 42

Transcendent DVR Series
Button
Ø Preset Setting
Click "Preset" to go to preset operation tab and then click "Add" button to pop up a window as
shown below. Select the preset and then input the preset name in the window; finally click "OK"
button to save the settings. You can add up to 255 presets for each dome.
Adjust the dome's direction and then click "Save Position" to save the current preset position
(you can also click another preset in the preset list and then save the preset position after
adjusting the dome's direction); click
button to delete the selected preset.
You can also go to preset setting interface for preset setting, see 6.2 Preset Setting for details.
Ø Cruise Setting
Click "Cruise" to go to cruise operation tab and then click "Add" button to pop up a window as
shown below left. You can add 8 cruises for each dome at most.
Input the cruise name in the "Add Cruise" window and then click "Add preset" to pop up
the "Add Preset" window (Before adding preset to the cruise, please add preset of the dome
first).
In the "Add Preset" window, select the preset name, preset time and preset speed and then
click "OK" button.
Click to go to the previous menu.
Click to go to the next menu.
Meaning
in the preset list to call the preset; click "Delete"
41