Spot Out - Vitek VT-SRE Spire Elite User Manual

System Setting
To edit a sequence
1.
Select a sequence that you want to edit in the list by
clicking the <EDiT> button, or double-clicking the
sequence title
2.
The "EDiT" dialog appears.
3.
Use the [▲▼◀▶/EnTER] buttons on the remote control
or use the mouse to edit the selected sequence.
i SEQUEnCE TiTLE : enter a new sequence name.
i ACTiVATiOn : Activates/Deactivates the sequence.
i MODiFy : change the sequence settings.
i DELETE : delete the selected sequence.
i CAnCEL : cancel the changes.
4.
Pressing the <MODiFy> button will display the Modify
Sequence window.
5.
To change the existing settings, select a screen mode
that you want to edit and right-click to display the
context menu. Then, select <MODiFy>.
6.
When done, click <CLOSE> to close the window.
7.
To apply your changes, click <APPLy>.
\ \

SPOT OUT

you can configure the Spot Out to display a Live channel
in various live view types (depending on model).
From <MEnU> - <SySTEM SETUP> - <DiSPLAy>, select
<SPOT OUT>.
1.
Use [▲▼◀▶/EnTER] button of the remote control or
mouse to edit Spot Out properties (select the name in
the LiST)
i SPOT TiTLE : name the Spot Out.
i ACTiVATiOn : Activates / deactivates the spot out.
i MODiFy : Edit the view type of the spot output.
i SAVE : Save the changes of spot output settings.
2.
To apply your changes, click <APPLy> button.
3.
Once completed with setup, press [ExiT] button of the remote control or click <CLOSE> button on the bottom of the
screen. A confirmation dialog appears and returns to the previous menu.
nOTE: The above steps also apply to the SPOT-16 DiViSiOn feature in the SRE and SRP models.

68