Vitek VT-TTAR810 User Manual page 50

Transcendent DVR Series
set day schedule or week schedule.
Ø Set Day Schedule
Click and then drag the cursor on the time scale to set record time; click
drag the cursor on the time scale to delete the selected area.
You can manually set the record start time and end time. Click
"Manual" on each day to pop up a window as shown below. Set the start and end time in the
window and then click "OK" to save the settings.
Click "All" to set all day recording; click "Reverse" to swap the selected and unselected time in
a day; click "Clear All" to clear all the selected area in a day.
Click "Copy To" to copy the schedule of the day to other days. Refer to the picture below.
Check the days in the window and then click "OK" to save the settings.
Ø Set Week Schedule
Click or
the picture below. Set the start and end time, check the days in the window and then click "OK"
to save the settings.
: add button;
and then click "Manual" beside
: delete button.
to set the week schedule. Refer to
49
and then
or and then click