Vitek VT-TTAR810 User Manual page 19

Click "Wizard Setup" to start wizard. The setting steps are as follows.
System Login. Set your own password or use the default when you use the wizard for the
first time (the default username of the system is admin and the default password of admin is
123456); select the login username and enter the corresponding password next time.
Click "Edit Security Question" to set questions and answers for password security of admin. If
you forget the password, please refer to Q4 in Appendix A FAQ for details.
Click "Next" to continue or click "Cancel" to exit the wizard.
Date and Time Configuration. The date and time of the system need to be set up if you
use the wizard for the first time. Refer to the following figure. Set the time zone, system time,
date format and time format. The DST will be enabled by default if the time zone selected
includes DST. Click "Next" to continue.
Transcendent DVR Series
18