Sequence; Spot - Vitek VT-HDOC Series Manual


OK: press OK button to confirm configured video output.
If monitor doesn't support HD resolution, then configure VGA resolution on HYBRID-DVR.
In case HD resolution like 720p/1080p connecting with VGA cable, first connect VGA cable and power on for HYBRID-DVR.
Factory default resolution is 1024x 768, so you should use monitor supporting at least 1024 x 768.

6.2.3 SEQUENCE

Screen auto switch time can be configured here.
SEQUENCE DWELL: The time that each screen is displayed in a sequence operation.
SPOT SEQUENCE DWELL: The time that each screen is displayed in a SPOT sequence
operation.

6.2.4 SPOT

Hybrid-DVR provides the single channel or Multi screen SPOT monitoring video output. In this menu
page, you can configure the default channel for SPOT output.
36
VT-HDOC Series