Configuring Dual Tcp/Ip; Configuring The Library For Dual Tcp/Ip; Hsc/Els Ptf Hli Compatibility Level Support For Frs_4.00 And Above - Oracle StorageTek SL3000 User Manual

Table 6–1

HSC/ELS PTF HLI Compatibility Level Support for FRS_4.00 and above

HSC/ELS Level 20 or
Level Below
6.1 Level 21 PTF
6.2 Level 21 PTF
7.0 (MVS) Level 21 PTF
7.1 (MVS) Included
1
Can connect to one SL3000 RE library in an ACS string. Only the connected library can be switched through HSC switch
command.
2
Can connect to one SL3000 RE library in an ACS string. All RE libraries can be switched through the HSC switch command.
Supports 32 TCP/IP connections. Includes dual TCP/IP support, display of acs-id, auto CAP recovery, and support for 64
read in-transit cartridges during cartridge recovery.
3
Can connect to multiple SL3000 RE libraries in an ACS string. Includes same functionality as the enhanced RE support.

Configuring Dual TCP/IP

Configuring the Library for Dual TCP/IP

■
Configuring an ACSLS Host for Dual TCP/IP
■
Configure an ELS Host for Dual TCP/IP
■
See also:
■
Configuring the Library for Dual TCP/IP
Use the route command to manage the routing tables. Define routes for the 2A and 2B
ports to the hosts.
Using the CLI, take both ports offline:
1.
SL3000> network ip link set dev 2A down
SL3000> network ip link set dev 2B down
Add the new IP addresses and subnet masks for both ports:
2.
SL3000> network ip address add IP_address/netmask dev 2A
SL3000> network ip address add IP_address/netmask dev 2B
To make the change active, bring both ports online:
3.
SL3000> network ip link set dev 2A up
SL3000> network ip link set dev 2B up
Enter the network routing configuration for each port:
4.
■
Level 21 Level 22
L1H14UU (VM) Unsupported
L1H14UV (MVS)
L1HA4UW (VM) L1H15DH (VM)
L1H14UX (MVS) L1H15DI (MVS)
L1H14UY L1H15DJ
Included Included
Before configuring dual TCP/IP, gather information regarding
Note:
the network, routing, and IP addresses from the administrator or use
the appropriate network ip command.
"Dual TCP/IP Overview"
For multiple hosts, add the IP address and netmask for each host:
SL3000> network ip route add IP_address/netmask dev 2A
SL3000> network ip route add IP_address/netmask dev 2B
Level 23 Level 23
Minimum RE Enhanced RE
1 2
Support Support
Unsupported Unsupported
L1H15H9 (VM) L1H15MF (VM)
L1H15HA (MVS) L1H15ME (MVS)
L1H15HB L1H15MH
Included Included
on page C-1
Configuring Host Applications 6-5
Configuring Dual TCP/IP
Level 23
Multi-RE
3
Support
Unsupported
L1H168F (VM)
L1H168G (MVS)
L1H168H
L1H168I