Viewing Library Properties And Configuration; Viewing Device Status And Properties - Oracle StorageTek SL3000 User Manual

Viewing Library Properties and Configuration

Viewing Library Properties and Configuration
In SLC, select Tools > System Detail, and then select the Library in the device tree.
1.
Click the Properties tab.
2.
Select a secondary tab:
3.
■
■
■

Viewing Device Status and Properties

You can view information about CAPs, drives, robots, redundant electronics, power
supplies, and the safety door. You can also view device information using the SLC
Reports utility (see
page 13-1).
In SLC, select Tools > System Detail.
1.
Select the device folder in the device tree.
2.
For more detailed information, expand the device folder. Select a device.
3.
Select a tab. Depending on the device you select, refer to the corresponding
4.
information below.
Device Status and Properties Information
All devices have the following system detail tabs.
Status Tab — displays the current operational state of the device. You can place a
■
device online or offline with this tab (see
and
Properties Tab — displays device configuration information, including the serial
■
number and current firmware levels
Drive Information
Only drives have the following system details tabs.
Display Tab — displays network data, the Virtual Operator Panel (VOP) for
■
T10000 and T9840D drives, and drive LED status
Drive Tray Tab — displays the current status of a drive tray
■
Drive Status
Empty
Unloaded
12-2 StorageTek SL3000 User's Guide
General — displays the physical, mechanical, logical, and network
configuration of the library.
Library Controller — displays details of the library controller, including the
serial number and firmware versions.
Drive Controller — displays details of the drive controller, including the serial
number and current firmware versions.
"Viewing Library and Device Reports with the Reports Utility"
"Bringing a Device Online"
For AEMs, a "closed" door position indicates the safety door is
Note:
completely down and it is safe for you to open the AEM access door.
Meaning
No cartridge is mounted to the drive.
Cartridge is ready for dismount.
"Taking a Device Offline"
on page 14-2).
on
on page 14-2