Recontrol; Snmp - Oracle StorageTek SL3000 User Manual

reControl

partition11.txt – Multiple partitions (random) HLI interface.
partition12.txt – Multiple partitions (random) SCSI interface.
Example:
SL3000> partition predefined file 5
requestId
requestId 7601
Done
Failure Count 0
Success Count 1
COMPLETED
partition setCapacity { <Partition Id> , <Capacity> }
Sets the capacity for the designated partition. Existing partitions not listed in the
command will have their capacity set to zero.
Example:
SL3000> partition setCapacity 1,200 2,50 3,600
requestId 7601
Done
Failure Count 0
Success Count 1
COMPLETED
partition setNonPartitionedHLI
Sets the partition to hli0. If there are any drives in the media validation pool, they must
be removed beforehand. If in complex, it sets all the libraries to hli0.
partition set state {online | offline} <Partition Id>
Sets the current state (offline/online) of a specified partition.
partition set {hli | scsi}
Sets the interface type for the entire library. Available on SL3000 only.
partition status
Displays the current partitioning status.
reControl
This command controls/switches the redundant electronics and retrieves the library
controller redundant electronics statuses.
reControl
Displays help for the reControl command, same as "help reControl".
reControl status [ <library address> | * ]
Retrieves the redundant electronics status.
<library address> - specifies the library in library, rail, column, side, row format. For
■
example: 2, 0, 0, 0, 0.
* - retrieves status from all libraries in a complex
■

snmp

This command configures the Simple Network Management Protocol (SNMP). For
detailed information, see the SNMP Reference Guide on OTN.
A-12 StorageTek SL3000 User's Guide