Overriding A Partition Cap Reservation; Changing The Cap Assignment Mode In A Non-Partitioned Fc-Scsi Library - Oracle StorageTek SL3000 User Manual

Overriding a Partition CAP Reservation

In SLC, select Tools > Diagnostics.
1.
Expand the CAP folder in the device tree, and then select the CAP to modify (the
2.
left AEM CAP is column –31 and the right is column 31).
Click the Access tab.
3.
In the Locked drop-down list select:
4.
■
■
Click Apply.
5.
Overriding a Partition CAP Reservation
If a CAP reservation is not released by a partition and cannot be terminated on the
ACSLS or HSC host, use this procedure to override the CAP reservation.
In SLC, select Tools > Shared CAP Assignment.
1.
Expand the CAP folder, and then select the CAP to override (the left AEM CAP is
2.
column –31 and the right is column 31).
Click the Unreserve tab.
3.
Click Apply to override the reservation.
4.
Click OK to continue with the override operation.
5.
If the CAP is locked, unlock it using SLC (see
6.
CAP"
Open the CAP. Remove any cartridges and label them with the partition ID.
7.
Close the CAP. The CAP status changes to "unreserved".
8.
Determine if the cartridges from the CAP should be re-entered into the library and
9.
then enter the cartridges into the correct partition.
Changing the CAP Assignment Mode in a Non-Partitioned FC-SCSI
Library
Changing the CAP assignment mode changes the mode for all CAPs in the library. The
CAP assignment mode controls whether library CAPs can be used for normal host
operations or for diagnostic moves.
Verify that all library CAPs are unreserved, empty, closed, and locked.
1.
If you are changing the CAPs to diagnostics mode, stop all host operations (see the
2.
tape management software documentation).
Select Tools > CAP Assignment.
3.
8-4 StorageTek SL3000 User's Guide
If the CAP is reserved by a host, the host must release the CAP
Note:
reservation before you can unlock the CAP.
True to lock
False to unlock
You must follow all steps in this procedure or the CAP could
Note:
be left unavailable to all partitions.
on page 8-3).
"Locking and Unlocking an HLI