ssh
This command controls configuration for the ssh daemon/server which resides on the
HBC. This is the protocol utility which SLC and other various applications use to
connect to the library controller.
ssh print
Prints the current ssh daemon protocol settings.
ssh set version1and2
Sets the ssh daemon protocol restriction to v1 and v2. (this is the default). The ssh
server is restarted.
ssh set version2
Sets the ssh daemon protocol restriction to v2 only.
time
This command sets the library time in military time notation.
time
Displays help for the time command, same as "help time".
time print
Displays the current system time.
time <HH> : <MM>
Sets the system time. Resolution is within one minute. In a library complex, the library
with libraryId = 1 is the master. Change the time on the master library.
<HH> - two digit hour
■
<MM> - two digit minute
■
time <HH> : <MM> : <SS>
Sets the system time. Resolution is within one second. In a library complex, the library
with libraryId = 1 is the master. Change the time on the master library.
<HH> - two digit hour
■
<MM> - two digit minute
■
<SS> - two digit second
■
traceRoute
This command traces the network route to a specified IP address.
traceRoute <IP Address>
Executes a traceRoute to the IP address specified.
version
This command displays the customer version and the versions of the software for the
device(s) requested.
version print [ <device address> | *]
Displays the software version of code for a device or all devices.
Command Line Interface Reference A-13
version
Need help?
Do you have a question about the StorageTek SL3000 and is the answer not in the manual?
Questions and answers