Importing/Exporting Diagnostic And Cleaning Cartridges; Importing Diagnostic And Cleaning Cartridges; Exporting Diagnostic And Cleaning Cartridges - Oracle StorageTek SL3000 User Manual

Click . . . to see details about the cartridge.
7.

Importing/Exporting Diagnostic and Cleaning Cartridges

The library can perform only one diagnostic or cleaning cartridge import or export
operation at a time. The library controller reserves the CAP for the entire operation.
Before importing, verify the cartridge has the proper label. Diagnostic cartridges must
have DG as the first two characters of the eight character volume ID. Cleaning
cartridges must have CLN as the first three characters.

Importing Diagnostic and Cleaning Cartridges

Verify that the library has enough empty reserved system slots. There must be at
1.
least one empty system slot in the base and DEM for robot recovery or library
initialization (see
Verify the CAP is empty, not reserved by a host, closed, and locked (see
2.
Device Status and Properties"
In SLC, select Tools > Diagnostics.
3.
Expand the CAP folder in the device tree, and then click a CAP to use.
4.
Click the Import/Export tab.
5.
In the Operation section, select Import Cleaning/Diagnostic cartridges.
6.
Click Start.
7.
Load the cartridges into the CAP (follow
8.
page 8-2 starting with step 2).

Exporting Diagnostic and Cleaning Cartridges

Verify the CAP is empty, not reserved by a host, closed, and locked (see
1.
Device Status and Properties"
In SLC, select Tools > Diagnostics.
2.
Expand the CAP folder in the device tree, and then click a CAP to use.
3.
Click the Import/Export tab.
4.
Select a type of export operation. If exporting specific cartridges, select the
5.
cartridges to export in the "Select Cartridges(s) to export" list.
Click Start.
6.
The library will consider a used cleaning cartridge to be
Caution:
new, and set the usage counter to zero.
Note: Only import cleaning cartridges using SLC if Auto Clean is
enabled (see "Enabling Drive Auto Cleaning"
managed drive cleaning, import the cleaning cartridges using the host
software.
"Using Reserved System Slots"
Importing/Exporting Diagnostic and Cleaning Cartridges
on page 7-1). For host
on page 9-5).
on page 12-2).
"Entering Cartridges Using a CAP"
on page 12-2).
"Viewing
on
"Viewing
Managing Cartridges 9-3