Resetting The Capacity Configuration - Oracle StorageTek SL3000 User Manual

Resetting the Capacity Configuration

In the Select by drop-down list, select a range. Then, select Add (to enable the area
4.
for activation) or Remove (to deactivate the area).
Using the library map, click the storage slots you want to activate or deactivate.
5.
When you have completed the configuration, click Apply User Design.
6.
Reconfigure library host applications to recognize the changes (see your host
7.
software documentation and
page 6-1).
Capacity Icons
SLC Icon
Resetting the Capacity Configuration
Resetting the capacity applies the default capacity as defined by the default capacity
policy (see
To prevent conflicts, coordinate with other library users before configuring the
1.
library.
In SLC, select Tools > Select Active Cells. Select the Module Map tab.
2.
Select any module in the library. Click the Select Active Cells tab.
3.
Click Reset to Default.
4.
4-2 StorageTek SL3000 User's Guide
If you are customizing capacity for the first time, you must
Note:
deselect all storage slots:
In the Select by drop-down list, choose Library. Then, select the Remove
1.
option.
Click any "Selected" slot on the module map to make all slots "Inactive".
2.
If there are warnings, DO NOT commit the changes. Click
Caution:
Details >>, and then perform recovery moves on the orphaned
cartridges (see "Moving Cartridges (Recovery Moves)"
Description
Not Accessible — slot not available for activation (reserved for diagnostic
cartridges, physically blocked, and so on).
Inactive — slot not yet licensed for use
Active — slot licensed for use
Selected — slot designated for activation or deactivation
No activation needed — resource is active by default
Resetting the configuration removes all custom capacity
Caution:
activation, partitioning, media validation pools, and resets all SCSI
element IDs in a SCSI library.
"Setting the Default Capacity Policy"
"Updating Hosts After Modifying Capacity"
on page 4-3).
on page 9-1).
on