Custom Capacity Numbering Example; Scsi Numbering In A Partitioned Library; Scsi Element Numbering For Custom Capacity - Rear Wall; Appended Scsi Element Numbering For Added Capacity - Rear Wall - Oracle StorageTek SL3000 User Manual

FC-SCSI Element Numbering

Custom Capacity Numbering Example

For this example, the user activates 50 slots, beginning with the DEM. As a result, the
SCSI storage element numbering begins at 2000 with the upper left-most active slot in
the DEM (see
Figure E–10 SCSI Element Numbering for Custom Capacity - Rear Wall
At a later date, the user activates the remaining 30 slots in the library. The library
numbers the slots starting with 2050 in the upper left corner of the CEM (see
Figure E–11
Figure E–11 Appended SCSI Element Numbering for Added Capacity - Rear Wall

SCSI Numbering in a Partitioned Library

When you define a partition, the numbering begins with the left most slot on the rear
wall within the partition. The numbering scheme follows the pattern defined in
E-14 StorageTek SL3000 User's Guide
The library in this example has been simplified. It is not an
Note:
exact representation of an SL3000.
Figure E–10 below).
below).