Setting [Multi; Canceling [Program]; Registering [Program] - Riso SF Series User Manual

92
Chapter 5 Useful Functions
Setting [Multi-Page Mode]
1
Touch [Program] in the [Functions]
tab screen.
The [Program Type] screen is displayed.
BYou can also display the [Program
Type] screen by pressing the [P]
key.
2
Touch [Multiple].
3
Enter a value in [Cps.] using the
numeric keys.
You can enter a value into the active entry field.
4
Change the target for entry to the
next field.
• Press the [+] key or the [U] key.
• It is also possible to select the entry field by
directly touching the target.
Repeat steps 3 to 4 as necessary.
BTo clear all entered values, touch
[Clear All].
BThe total of the entered number of
copies is displayed at the top of the
screen.
BIf you want to register the pro-
grams that are set in this screen,
touch [Entry/Call] before [OK].
Then, go to step 3 in "Registering
[Program]" (A 92).
5
Touch [OK].
The basic screen is displayed.
When you press the [START] key, printing can
be performed according to the program that
you set.
BWhen the optional auto document
feeder is not installed, the print is
performed from the last original in
reverse order. (Example: [Page 03]
-> [Page 02] -> [Page 01])
BWhen the optional auto document
feeder is installed, the print is per-
formed from the first original. (For
example, [Page 01] -> [Page 02] ->
[Page 03])

Canceling [Program]

1
Touch [Program] in the [Functions]
tab screen.
The [Program Type] screen is displayed.
BYou can also display the [Program
Type] screen by pressing the [P]
key.
2
Touch [Cancel Job].
3
Touch [OK].

Registering [Program]

It is useful if you register a program that is used fre-
quently.
You can register a total of 12 [Single Page Mode] and
[Multi-Page Mode] programs.
1
Set a program.
Perform either of the following settings.
• Steps 1 to 6 in "Setting [Single Page Mode]"
(A 91)
• Steps 1 to 4 in "Setting [Multi-Page Mode]"
(A 92)