Customizing Your Phone; General Settings; Phone Status; Audio Setting - Yealink Voipon Manual

Table of Contents

Enterprise IP Phone

Customizing Your Phone

You can check the network status of your phone by keypad, or check the phone status

by Web interface.

To operate via the keypad, please refer to the above "Network configuration".

To view the Phone Status via Web interface:

Open the web browsers and input the IP Address http://WAN-ip-address; Enter the

account and password (default account and password are both "admin"), choose Status

directly to check the status.

You can adjust the volume of handset/ring tone/signal tone.

To adjust the volume when you are in an active call:

When Handset mode is activated, press the Volume Adjustment Bar to adjust the

volume of signal tone to a comfortable level. When phone is idle, press it to adjust the

volume of ring tone. And during a call, press it to adjust the volume of handset.

Note:

The volume can only be set via the volume adjustment bar on the keypad.

You can adjust the type and volume of the ring tone.

To change the Ring Tone Type via Web interface:

Choose Phone->Preference->Ring Type, highlight the specific one in the scroll-down

menu, click confirm button to update the change.

The IP phone supports the following voice codecs:

G723_63，G722，G726-16，G726-24，G726-32，G726-40，PCMA，G729，PCMU and

- 10 -

www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Table of Contents