6.10 Downloading Data to Database
From the Instrument menu, select "data" to download the data recorded to the
PowerPad™.
1. Select the data you want to Download by clicking on the desired tab
(Recordings, Photographs, Alarms, Transients, Power/Energy, EN50160),
then clicking on the fi le name.
2. Select "Download to Database" (this may take few minutes).
3. Type a name for the fi le downloaded and click "OK".
Following are examples of each tab listed in the display window.
6.10.1 Photographs
The Photographs window displays a list of photographs taken on the PowerPad™.
It shows the date and time when the camera button was pressed.
When "Download to Database" is selected it shows the waveforms and power
data from the time the camera button was pressed.
NOTE: Snapshots can only be initiated using the
itself, not by DataView
Power Quality Analyzer Model 3945
Figure 6-11
®
.
button on the PowerPad™
73