Selecting Or Deleting A Record - AEMC PowerPad 3945 User Manual

5.6.2 Selecting or Deleting a Record

TEST
PUMP
MOTORA
The status bar at the top displays the memory occupied by previous records.
To Select a Recording:
• Press the
appear in bold type. Press the
To Delete a Recording:
• Select the record to be deleted with the
and then press the
Tip!: It is possible to display a measurement being recorded by selecting
the name of the recording. To refresh the screen, press the mode buttons
(caution: loss of cursor position and zoom capability will occur).
The instrument automatically makes a correction if the programmed dates and
times do not match any of the following:
- the current date
- the current time
- the set storage rate
It is recommended to set multiple times:
- of 2 for 2 min
- of 5 for 5 min
NOTE: The instrument automatically corrects the start and end time in order to improve
the readability of the time scales of the recording mode (graph representation).
50
SELECTION OF RECORDING
07/25/02 17:58
07/18/02 17:58
07/12/02 14:41
buttons to select the recording. The current selection will
button to delete the selection.
07/25/02 10:56
> In progress
> 07/18/02 11:45
> 07/12/02 16:40
Figure 5-20
button to accept the selection.
buttons, press on
Power Quality Analyzer Model 3945
100%
button