Single Phase And Phase-To-Phase Current Analysis - AEMC PowerPad 3945 User Manual


Cursor enables selection up to 50
th
as the 25 harmonic is reached, the 25
the DC component).
Ž
Selection of expert mode -.+ is available for 3-phase hookups by pressing the
buttons (see §5.2.4 for description).

5.2.2 Single Phase and Phase-to-Phase Current Analysis

Ah 03
%
50
25
V
Selection of 3-phase or individual phases L1, L2 and L3, displays:
• The total THD
• The MIN and MAX instantaneous values
• The parameters for the harmonic order selected by the cursor:
- Percentage in relation to the fundamental
- RMS value and phase angle in relation to the fundamental component
• MIN, MAX instantaneous values for the selected current harmonic
MIN, MAX values are reset each time the cursor position is changed.
Power Quality Analyzer Model 3945
60.00Hz
34.1
%
max
34.5
%
max 1
.1
%
1 3 5 7
A
th
harmonic, with the
th
to 50
07/25/02
2.8
A
THD
9 11 13 15 17 19 21 23 25
VA U
Figure 5-9
buttons. As soon
th
range appears (0 represents
10:26 100%
-040°
36.5
%
.+
3L
L1
L2
L3
39