Saving A Display - AEMC PowerPad 3945 User Manual

The energy over a selected period can be calculated from the average power
records:
• Move the cursor to the start time.
• Press the
• Move the cursor with
• The energy value is displayed, with end date and end time
It is possible to make an energy measurement over several recording ranges in
the 4 quadrants.
NOTE: All data in a recording session can be downloaded to a PC using the
®
DataView software.
The and
ment and the graph time-scale to be changed.
Display Averaging Period
NOTE: The minimum integration period is limited by the recording period.

5.7 Saving a Display

This button allows 12 snapshots to be saved for future recall and evaluation.
• Press the
• The icon is displayed in the top left corner as soon as the operation is
successful.
• This icon is replaced by
record the display.
NOTE: These screens can be downloaded to a PC via the DataView
54
function button.
buttons to the desired end time
buttons allow the integration period of the displayed measure-
2 hours
1 hour
15 minutes
10 minutes
5 minutes
1 minute
20 seconds
5 seconds
1 second
button (for about 3s) to capture the current display.
Graph Scale
over 5 days
over 2 1/2 days
over 15 hours
over 10 hours
over 5 hours
over 1 hour
over 20 minutes
over 5 minutes
over 1 minute
if there is no space left in the memory to
Power Quality Analyzer Model 3945
® software.