Covers - Xerox Versant 180 Press User Manual

Fold and Staple (optional)
Folding and/or stapling are optional features. These features are available only with
finishing devices that provide these capabilities.
When available, select the desired Fold and Staple option:
• No Fold and Staple: This option produces booklets without folding or stapling.
• Fold Only: This option produces booklets that are folded in half.
• Fold and Staple: This option produces booklets that are folded in half and stapled
in the center.
Booklet Trimming/Pressing (optional)
Booklet trimming and pressing are available only if the optional SquareFold Trimmer
Module is attached to the Booklet Maker Finisher.
Booklet Trimming/Pressing options include the following:
• Booklet Trimming: This option trims (cuts) away the face (edge) of the booklet,
resulting in a neat finished edge.
• Book Pressing: Book Pressing, also known as square folding, flattens the booklet
spine, thereby reducing the booklet thickness and giving it the appearance of a
perfect bound book.

Covers

This feature allows you to automatically add covers to your copied sets using stock from
a different tray. For example you can add colored stock, card or transparencies to your
copied sets to add a professional finish to your copy job.
The Covers feature includes the following options:
Front Cover/Back Cover
Select an option for a front cover only, back cover only, or select options for both front
and back covers:
• Off
• Blank Cover: Uses blank sheets of paper as the cover.
• Print on Side 1
• Print on Side 2
• Print on Both
Paper Supply
Select the tray or trays from which front and/or back cover media is supplied. If Blank
Covers is selected, enter the number of blank sheets that will be used for the covers.
Note
If Blank Cover is used for both the front and back covers, verify that the correct quantity
is selected for both the covers.
® ®
Xerox Versant 180 Press
User Guide
Press Apps
3-21