First Print-Out Time; Press Warm-Up Time; Document Feeder Specifications; Copy Specifications - Xerox Versant 180 Press User Manual

Specifications

First Print-Out Time

From standby mode, system usually takes less than 1 minute to the start printing
• From a cold start (power on or power saver), system takes less than 5 minutes to start
printing

Press Warm-up Time

The press warmup times vary depending on the current state/mode of the press. Warmup
times are listed as follows:
• From a cold start (either power on or power saver mode), less than 5 minutes
• From Sleep Mode/Power Saver, less than 5 minutes
• From Standby Mode, less than 1 minute
• When switching print modes (such as from black only to full color), approximately 2
minutes

Document Feeder Specifications

Item
Document Size / Type
Paper Capacity
Document Changing Speed
(8.5 x 11 in./A4 portrait, 1-
sided)

Copy Specifications

Item
Copier Type
Scanning Resolution
7-2
Specification
Size:
Maximum: A3/11 × 17 in. (297 ×432 mm)
Minimum: A5/5.82 x 8.26" (148 x 210 mm)
Weight: 10-53 lb./38-200gsm (2 sided: 50-200 gsm)
Type:
A5, A5, A4, A4, 8.5 × 11 in., 8.5 × 14 in. (SEF), 11 × 17 in. (SEF)
250 sheets
When using Xerox 20 lb./75 gsm paper.
Monochrome: 80 sheets/min
110/125
Console
600 × 600dpi (23.6 × 23.6 dots/mm)
® ®
Xerox Versant 180 Press
User Guide