Maintenance; Cleaning The Press Overview; Cleaning The Exterior; Cleaning The Document Cover And Glass - Xerox Versant 180 Press User Manual

Maintenance

Cleaning the Press Overview

• Before you start to clean the press, be sure to switch off the power using the rear
breaker switch and unplug the press. Cleaning the press without switching off the
power may cause an electric shock.
• Always use a dry lint-free cloth for all cleaning actions unless otherwise directed.
• Do not use benzene, paint thinner, other volatile liquids, or spray insect repellent on
the press as doing so may discolor, deform, or crack covers.
• If a moistened cloth is used, wipe afterwards with a dry lint-free cloth. Cleaning the
press with an excessive amount of water may cause the press to malfunction and/or
damage documents during printing.

Cleaning the Exterior

1. Wipe the exterior with a soft cloth moistened with water. If dirt is difficult to remove,
try gently wiping with a soft cloth moistened with a small amount of neutral detergent.
2. Wipe off any excess water from the exterior with a soft cloth.

Cleaning the Document Cover and Glass

1. Cleaning the document cover
® ®
Xerox Versant 180 Press
User Guide
5
5-1